Block Board
PINE BOARD WITH GURJAN CORE
Our block-boards provide for a sturdy and solid foundation that can withstand great amounts of weight and pressure, yet look crisp and clean with the finishing unparalleled by the best in our country. We use the same superior quality in all respective categories of our block-board range as we do in our plywoods.
Block-Boards are offered in MR, BWR & BWP category. All category block-boards are offered in Australian Pine Wood also. Available in 19mm and 25mm thickness in all sizes.
- Most importantly no ripples on board surface.
- Excellent insulation and Mechanical properties.
- High Dimensional Stability and density.
- Anti-Warp.
- Carpenter Friendly.
Technical Specifications
| Test | ISI Requirement | Test Result | ||||
|---|---|---|---|---|---|---|
| 5 - 15% | 8 - 10% | |||||
| Dimension & Squareness |
|
|
||||
| Dimensional changes | +- 1mm at RH 90% | less than 0.6mm | ||||
| Caused by Humidity | RH 40% | |||||
| Adhesion of Ply | Excellent | Excellent | ||||
| Water Resistance - MR Grade | 3 hour at 60+- c | More than 12 hour at 60o c | ||||
| BWP Grade | 72 hours at 100 | more than 72 hours at 100o c | ||||
| Mycological test- MR Grade | One cycle for 21 days | Can udergo 3 cycles of 21 days each without any edge sepration | ||||
| MOR |
|
|
||||
|
|
|||||
| AVG N/mm2 |
|
|
||||
| Min Ind N/mm2 |
|
|
||||
| MOE |
|
|
||||
|
|
|||||
| AVG N/mm2 |
|
|
||||
| Min Ind N/mm2 |
|
|
